0325367
Today
Yesterday
This Week
Last Week
This Month
Last Month
All days
255
254
1210
1427
3291
7177
325367

Forecast Today
504

7.36%
27.15%
12.62%
3.93%
0.18%
48.76%
Online (15 minutes ago):14
14 guests
no members

Your IP:54.221.75.115

Articles

Centrifucal pump 
Application
The FEC pump is a highty efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. FEC is avaliable in two sizes FEC10 and FEC25.
             

Standard design

  • The FEC pump  consist of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seals.
  • The FEC pump is designed for CIP with emphasis on large internal roundings and cleanable seals
  • The FEC pump has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs.

Shaft seals

  • The FEC pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal ring in acid-resistand steel AISI316 with sealing surface in silicon carbide and rotating seal ring in carbon.
  • The secondary seal of the flushed seal is a long lasting lip seal.

    FEC10                                                                    FEC25
    Flow rate : 5 - 40 M3/H.                                          Flowrate : 25 - 95 M3/H.
    Head : 10 - 35 M.                                                   Head : 35 - 55 M3/H.
    Motor (kw.) : 1.5, 2.2, 3, 4                                      Motor (kw.) : 5.5, 7.5, 11, 15

         Mech. seal : Silicone/ Carbon, Silicone/ Silicone
         Product wetted steel parts : AISI 316L.
         Product wetted seal : EPDM rubber
         Temperature rang : -10c to 140c
         Motor (Type) : Foot - Flanged motor IEC metric standard 2 pole = 3000 rpm.