0325334
Today
Yesterday
This Week
Last Week
This Month
Last Month
All days
222
254
1177
1427
3258
7177
325334

Forecast Today
408

7.36%
27.15%
12.62%
3.93%
0.18%
48.75%
Online (15 minutes ago):21
21 guests
no members

Your IP:54.221.75.115

Hammer mill

Application

Hammer mill is used to crush materials into the desired particle size. During operations, the hammer mill can reduce vibration appreciably with the 4 holes in the base for fastening the unit on the floor.

Low pressure

Application

The characteristic of product that is from the liquid and solid discharge can be modified by the following feature:- Increase the speed of screw can give the slightly dryer pomace (at the constant of flow rate) but make changing in viscosity of product liquid a bit.

Horizontal high pressure

Application

The juice from the portions of fruit such as core, broken pieces… will be extracted by Horizontal High Pressure. Extractor that help the manufacturer can get more yield recovery.  It can be used like as the 2nd stage, follow with Low Pressure Extractor.

Vertical High Pressure Extractor 

Application

The juice from the portions of fruit will be extracted by Vertical High Pressure Extractor that help the manufacturer can get more yield recovery. We recommend it can be used for the last step of extraction. The basic moving part is the spindle with many shaft tapers that is rotated slowly by  gearing.

Pine-M-Max

Application

The model Pine - M - Max is a pineapple juice extractor .This extractor is usually employed to process fruit sizes too small for efficient processing through Ginaca Processing lines supplying pineapple slices as the main product.

Pulper 

Application

The equipment is readily adapted to either pulping or finishing by changing the screen hole size in the Range from 375” to .010” An inlet impeller for breaking or macerating is available as an optional accessory.

Belt Press

Application

The equipment is readily adapted to either pulping or finishing by changing the screen hole size in the Range from 375” to .010” An inlet impeller for breaking or macerating is available as an optional

Ginaca

Application

The term “Ginaca” is now generally applied to a variety of machines which are designed to automatically center the pineapple on the core, cut out a fruit cylinder, eradicate the crushed and juice material  from the outer skin, cut off the ends and remove the central fibrous core.

Alow Vera Peeling

Application

Automatic peeli machine with removable infeed and output conveyor belt will help the manufacturer reducemanual work, working hours and prevent from lngoss of yeild (feed aloe vera leaves with thickness at least 6mm and after cutting top, down, side by manual)