0325386
Today
Yesterday
This Week
Last Week
This Month
Last Month
All days
274
254
1229
1427
3310
7177
325386

Forecast Today
504

7.36%
27.15%
12.62%
3.93%
0.18%
48.76%
Online (15 minutes ago):8
8 guests
no members

Your IP:54.221.75.115

Application  

The Model PMM 2L, PMM 3L is a pineapple juice extractor with a history of almost half a century successfully producing pineapple juice in many regions of the globe. This extractor is usually employed to process fruit sizes too small for efficient processing through Ginaca Processing lines supplying pineapple slices as the main product. for this application the size range processed through the Pine-M-Max is usually a 9.52cm (3.75")diameter pineapple or smaller. 

In processing plants where all the fruit is processed to juice the Pine-M-Max accepts fruit up to 15.25cm (6") diameter. Each Pine-M-Max would hands a definite size range in these facilities to allow the highest yields extracted.

The capacity for 11.3cm (4-1/2") diameter fruit is 8 tons per hour and for 15.25cm (6") diameter fruit is 14 tons per hour. 

     
Operation  

Extraction of the pulpy juice from the whole pineapple is accomplished in the Muninmax Model Pine-M-Max by putting the sized whole fruit onto the Pine-M-Max Feeder Model PMM 3L. 

The feeder aligns the fruit so itwill enter the Pine-M-Max where a saw cuts the hard core material and pineapple in half along its long axis and directs each half between two drums.

The back drum is covered with long pins, which act to force the pineapple halves through a passage made up of the front drum and a perforated grid. The grid is air loaded to give uniform pressure regardless of peel thickness.

The front drum has many small pins, which bite into the pineapple skin, and process the druit halve through a converging section. This action gives a combination of pressing and shearing.

The pressing causes the pineapple eys to retract into the skin and the shearing removes the pineapple juice stock from the skin. The hard core with juice removed is ejected with the skin. The juice flows to a finisher.