0325353
Today
Yesterday
This Week
Last Week
This Month
Last Month
All days
241
254
1196
1427
3277
7177
325353

Forecast Today
456

7.36%
27.15%
12.62%
3.93%
0.18%
48.76%
Online (15 minutes ago):31
31 guests
no members

Your IP:54.221.75.115

1.1 Automatic Welding

With our orbital welding equipment, we can handle projects of all sizes, ranging from small special fitting to large equipment and complete turn-key project. The product contract surface that will be smooth and it can protect the product out of penetrating of the microbe. Material handling, fabrication and inspection adhere to regulation of international standard on product used in high purity application.

Our welding machine can be done with the repeatability precision & QA/QC verification possible with mechanized welding. Acceptance limits are programed for each critical weld parameter. At the completion of weld, a printout records details or whether the weld was performed within the defined limit for acceptable weld quality. If any critical parameter falls outside the defined limit, our engineers can know immediately after finishing welding

1.2 Manual Welding

 

Figure 01: The 1st step of this is writing a WPS. This defines all the specifics that the individual welder must use for given procedure.

Figure 02: Next step to write a PQR.

Figure 03: The test specimen when must be sent to independent laboratory for testing along with all of the prior paperwork. This is referred to as the WPS (Hardness Testing, Microstructure Analysis, Tension Testing, Bend Testing, and Radiographic Testing)

Figure 04: At this point the welder is certification for this procedure.