FCM Centrifugal Pump

FCM Centrifugal Pump

The FCM pump is suitable for food, beverage, light chemical and pharmaceutical industries, which demand a normal duty, sanitary and efficient pump that ensures gentle product treatment at the same time

The pump design is aimed at medium duty construction, optimum inlet smooth flow and low noise level. The design conform to the international sanitary standard

The FCM pump consists of a standard motor, shaft, adaptor, back plate, impeller, pump housing and shaft seals

The FCM pump is designed for CIP with an emphasis on large, internal rounding and clean-able seals

The FCM pump has a stainless  steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs

The FCM pump have stationary seal rings of stainless steel and rotating seal rings of carbon

Product wetted steel parts       :           Acid-resistant steel AISI 304

Other steel parts                    :           Stainless steel AISI 304

Finish                                       :           Semi bright

Product wetted seals               :           EPDM rubber

(3~,50 Hz, 220-240V Δ / 380-420VY ≤ 4 kW)

Max. inlet pressure                  :           300 kPa (3 bar)

Temperature range                  :           -10°C to + 110°C (EPDM)

Noise level (at 1 m)                  :           60 – 80 dB (A).

Standard foot-flanged motor according to the IEC metric standard, 2 pole = 3000 rpm. at 50 Hz, IP 55, insulation class F.